Shipbuilding. Energy. Transport

On-line supplement
to the Maritime Market magazine

Shipbuilding. Energy. Transport Maritime Market magazine
Russian
Contacts
Search

Press Release

Wärtsilä's new Upgrade Kit for slow steaming helps to cut shipowners' fuel costs

December 3, 2008 - Wärtsilä has introduced a new Upgrade Kit for Slow Steaming for RTA and RT-flex low-speed engines to enable shipowners and operators to make major savings in fuel costs while slow steaming their ships. The Upgrade Kit allows Wärtsilä low-speed marine engines to be operated continuously at any power in the range of 20% to 100%. This means that with the Upgrade Kit ships can sail continuously at sea speeds down to some 60% full speed.
 
High bunker prices have put fuel efficiency high on the agenda of charterers, shipowners and ship operators. There is thus considerable interest in slow steaming that is operating ships for long periods at reduced sea speeds. Yet without modification with this Upgrade Kit, there is increased risk of engine fouling and excessive component temperatures when operating continuously below 50% engine load. The Upgrade Kit overcomes such problems, enabling the engines to operate continuously at powers down to 20% of their full installed power. The modified engine is not permanently derated but can operate at any time up to its full installed power. Owing to the characteristic power versus speed relationship of ship propellers, this extended operational power range enables ships to be sailed at sea speeds down to some 60% of full speed.
 
The first Upgrade Kits were ordered in November 2008 by the German owner Koepping Shipping Company for two container vessels, each with a single 8-cylinder Wärtsilä RTA62U engine. The two ships, "Aglaia" and "Lantau Arrow", are 1200 TEU fast feeder container vessels. They have a maximum speed of about 22 knots at design draft with the main engines delivering 15,000 kW at 107 rpm.
 
Joerg Koepping, Managing Director of Koepping Shipping, said "The Slow-Steaming Upgrade Kits will give these ships considerable flexibility to adapt to the present difficult market conditions, allowing great cost savings while slow steaming but retaining the capability for full speed whenever necessary."
 
The Upgrade Kit is available for all RTA and RT-flex engines with multiple turbochargers. For ships that must comply with the IMO NOX emissions regulations, the restrictions imposed by the emissions limits will be evaluated in each case and a customized turn-key package may be offered. RTA and RT-flex engines can be safely operated continuously at loads above 50% of the contracted maximum continuous rated (CMCR) power without any modifications.
 
The concept of the Upgrade Kit is to cut out a turbocharger when the engine is to be operated at low load. This increases the scavenge air delivery at low load for better combustion and more optimum temperatures of engine components. The cut-out point depends upon the engine configuration.
 
The Upgrade Kit involves fitting shut-off valves in the exhaust duct before the turbocharger turbine and in the scavenge air duct after the compressor, together with a bypass line to keep the turbocharger rotor spinning at a preset constant speed. The valves are remotely operated and the Kit includes fitting a control system to operate the valves.
 
The Upgrade Kit is delivered by Wärtsilä on a turn-key basis and includes engine performance analysis, cabling and installation, all materials and their transport, service engineers to undertake the whole installation and commissioning, and emission measurement and certification. The installation and commissioning of the Upgrade Kit can be completed during normal commercial operation of the ship and during normal port calls.
 
More information about the Slow Steaming Upgrade Kit

 


Caption 1: The container vessel "Aglaia" to which the Wärtsilä Upgrade Kit for Slow-Steaming will be fitted.

Caption 2: A typical brake specific fuel consumption (BSFC) curve for RTA and RT-flex engines, as standard and with the Upgrade Kit for Slow-Steaming. Note that it is not desirable to operate engines continuously at less than 50% load without modification.

 


Media contact:
Ms Marit Holmlund-Sund
Senior Manager, PR and Marketing Communications
Wärtsilä Corporation
Direct tel:       +358 10 709 1439
Direct fax:      +358 10 709 1425
e-mail:           
marit.holmlund-sund@wartsila.com

 
Mr Joerg Koepping
Managing Director
Koepping Shipping Company
Heideweg 1
D-24813 Schuelp/Rd.
Germany
Tel:                +49-4331-84 66 30
Fax:               +49-4331-84 66 44
e-mail:           
kship@online.de
Internet:          www.kship.de


2008-12-03

Please see Wärtsilä Corporation /Wärtsilä Vostok, LLC (WRU)/ company electronic office

For more information, please contact:
Mirja-Maija Santala
Media Manager
Wärtsilä Corporation
Tel. +358 (0)400 793 827
E-mail: mirja-maija.santala@wartsila.com 

Wärtsilä Vostok, LLC (WRU)
Tel/Fax: +7 812 448-32-48
E-mail:
office.spb@wartsila.com  

Company press releases




Please contact us if you require further information about press release and advertising publishing on our web site.
Phone: +7 (812) 336 3130, e-mail: info@setcorp.ru

© 1998-2019, Print-Expo Co. Ltd., all rights reserved.

RSS яндекс.ћетрика Up